Solid Oak Stable Cottage Door

Please contact us regarding manufacturing and delivery times on all our Solid Oak Cottage Doors

Please select the size you need from the options below:

All doors are supplied with a loose lock block.

We also offer a made to measure service. We understand that these doors are generally used in renovations of older properties and barn conversions which need a more bespoke service. If you require a door to be manufactured to a specific size please contact us stating the door size you need and we will get back to you with a quote.

Blueprint Cottage Doors manufacture these Ledged Doors from selected planks of Solid White Oak. We have three grades of door available Rustic, Character or Prime Grade.

Rustic Grade

By far the most popular grade due to the natural beauty of the timber on show. Rustic Grade allows the following natural character within the planks that form the door:

• Rough spots
• Large knots
• Some knots may contain splits
• Small shakes in the timber
• Worm track
• Natural timber grain character.

Our Rustic grade does not allow holes through the door or natural defect that will affect its structural strength.

Rustic grade timber panel.

Character Grade

This grade of wood is a step up from out Rustic Door; the specification allows for smaller knots and less natural defect in the planks. Character Grade allows the following natural character within the planks that form the door:

• Small knots
• Small shakes in the timber
• Natural timber grain character.

Character grade timber panel.

Prime Grade

Prime Grade woods allows very little natural character within the planks that form the door.

• Plank colour variation
• Small knots up to 5mm
• Natural timber grain character.

Prime grade timber panel.

There are also two types of decorative profile that you can choose from which help prevent the door from warping:

V-Groove

Below are examples of a v-groove profile which are used in between the Oak panels to connect them together.

An example of a v-groove Oak door profile.

Bead And Butt

Below are examples of a bead and butt profile which are used in between the Oak panels to connect them together. Unlike v-groove, you’ll notice that the panels are further apart making for a more distinct design.

An example of bead and butt Oak door profile.

Each size door has a set number of different sized planks, this allows you to buy doors at different times knowing that they will look identical in terms of plank size:

Pins are sunk below the surface of the timber so they can be filled and covered before finishing if desired. We can supply these doors with screwed and plugged ledges, this is an additional £18 per door. Please contact us if you require this service.

All doors are supplied with 3 ledges that run to edge of the door. If you require ledges setting in from the edge of the door please contact us and we can arrange. We can also supply different sized ledges or ledges set at different heights, just let us know what you want and we will manufacture your doors to your specification. We may charge for some amendments so please message us before buying.

Doors are manufactured using tongue and groove planks, small gaps are left between each plank to allow the timber to move freely without twisting or bowing. All boards used are kiln dried to a moisture content of approximately 8-10% which is ideal for internal use.

All doors are supplied unfinished ready for you to apply the finish of your choice. It is important to finish your doors as soon as possible. Do not store doors outside in cold or damp areas such are sheds or garages. Doors must be stored flat not stood on ends or edges.

We manufacture doors in our own workshop in Oswestry so we can offer a made to measure service. We understand that these doors are generally used in renovations of older properties and barn conversions which need a more bespoke service. If you require a door to be manufactured to a specific size please contact us stating the door size you need and we will return a quote back to you.

Delivery costs are:

• 1 Door – £20
• 2 Doors – £40
• 3 Doors+ – £60

These doors weigh between 30 and 40kg each so please be available to help unload during the delivery process. We will contact you with a specific delivery day, we cannot supply a time of delivery, however, we can help track your delivery on the day. We send the doors wrapped and packed securely with a third-party carrier, please ensure your door is received in good condition and only sign for the door once you are happy. If the courier asks for a signature before you get time to check it then please sign for it as “DAMAGED”.

Please do not start work or book any tradesmen until you have received and checked your doors. If there are any issues with your order please contact us on the day of delivery so we can resolve as quickly as possible. In the event of any issues Blueprint Cottage Doors will not pay towards the lost time of booked tradesmen, however, we will work with you to resolve any problems quickly and efficiently.